Troubleshooting · Washing machine repair
Washer not spinning? What to check, and when to call.
A washer that won’t spin is often a washer that hasn’t finished draining, or one that has decided the load is too unbalanced to spin safely. Mechanical faults come after those.
Before you start. Unplug the washer before you open anything or reach into the drum to rearrange a heavy load. Don’t try to force the door or lid open while it’s locked.
Rather not do it yourself?
- One call, free to useTell us the make and what it’s doing.
- Matched on zip code and brandAn independent local technician who covers your area.
- Estimate before any workNothing gets opened up until you’ve agreed a price.
Likely causes
What usually causes it, most likely first.
- Unbalanced load
One heavy item, like a bath mat, comforter or pair of jeans, pulls the drum to one side. The washer tries a few times, then gives up on the spin.
- It hasn’t drained
Most washers won’t spin with water still in the drum. If there’s water in there, start with the drain.
- Lid switch or door lock
If the machine can’t confirm the lid or door is locked, it won’t spin.
- Worn drive belt
On belt-driven washers, a stretched or broken belt means the motor runs but the drum doesn’t turn. Sometimes you smell burning rubber.
- Motor coupling or clutch
On some top-loaders, a worn coupling or clutch stops the drum reaching speed.
- Motor or control fault
Less common. The motor, its control or the main board has stopped driving the spin.
Checks you can do
Safe checks before you call anyone.
- Redistribute the load
Unplug, open it, spread the load out or take out the one heavy item and run a spin on its own.
- Check it’s level
A washer rocking on uneven feet reads as unbalanced. Adjust the feet until it doesn’t rock.
- Check for water in the drum
If there is, follow the steps in our washer not draining guide first.
- Make sure the lid or door shuts firmly
Look for anything stopping it closing, and note whether the lock light comes on.
- Note any error code
Many washers show an unbalanced-load or door lock code. Write it down with the model number.
When it’s a technician job
Call a technician if:
- Small loads won’t spin either
If it won’t spin with a light, even load, it isn’t a balance problem.
- Burning smell or squealing
Stop using it. That’s usually a belt, motor or bearing problem.
- The door won’t lock or unlock
Door lock assemblies need testing and replacing, not forcing.
- Loud grinding or banging when it does spin
Worn drum bearings get worse quickly and can damage the tub.
What affects the cost
What moves the price.
We don’t quote prices here because they depend on the fault, the model and where you live. These are the things that make the difference. Ask for the estimate before any work starts.
- Which part
A belt or lid switch is a smaller job than a motor, a clutch or drum bearings.
- Design
Direct-drive and belt-driven washers come apart differently.
- Machine age
Bearings on an older washer can cost more than the machine is worth. Ask the technician whether repair makes sense.
Straight answers
Common questions.
Why does my washer spin some loads and not others?
That pattern almost always means unbalanced loads. Bulky single items and small loads with one heavy piece cause it most.
Is it safe to keep using a washer that won’t spin?
You can finish a load by wringing it out, but don’t keep running it if you smell burning or hear grinding. That points at a failing part that will get worse.
How much will the repair cost?
Nobody can give you an honest number without seeing the machine. The technician diagnoses it, tells you the price, and only starts once you have agreed to it. If you would rather replace the appliance, you can stop there.
Who actually comes out?
An independent local technician who covers your zip code. We are a free service that connects you with them; they are not our employees and we do not guarantee their work. Ask for their license (where your state requires one) and proof of insurance before they start.
Keep going
Washing machine repair: more help.
Washing machine repair by city
- San Diego, CA
- Chicago, IL
- Boston, MA
- San Antonio, TX
- Charlotte, NC
- Sacramento, CA
- San Francisco, CA
- New York, NY
- Los Angeles, CA
- Seattle, WA
- Dallas-Fort Worth, TX
- Houston, TX
- Washington, DC
- West Palm Beach, FL
- Austin, TX
- Phoenix, AZ
- Las Vegas, NV
- Denver, CO
- Atlanta, GA
- San Jose, CA
- Miami, FL
- Fort Myers, FL
- Portland, OR
- Philadelphia, PA
Still not working? One call.
A local technician, an arrival window and an estimate before any work starts.
(833) 586-3850