Troubleshooting guideWashing machine repair · Free to use
Appliance Repair HubLocal technicians, one callAreas
(833) 586-3850Free for homeowners
Call now

Troubleshooting · Washing machine repair

Washer leaking? How to find the source, and when to call.

Washers leak from a handful of places: the fill hoses at the back, the door seal on front-loaders, the drain hose, and the pump underneath. When in the cycle the water appears is the best clue to which one.

Before you start. Turn off the water valves behind the washer and unplug it before you look underneath or move it. Water and outlets don’t mix, so dry the area first.

Rather not do it yourself?

  • One call, free to useTell us the make and what it’s doing.
  • Matched on zip code and brandAn independent local technician who covers your area.
  • Estimate before any workNothing gets opened up until you’ve agreed a price.
Start with a call

Likely causes

What usually causes it, most likely first.

  1. Loose or worn fill hoses

    The hot and cold hoses at the back loosen with vibration, and rubber hoses crack with age. Leaks here happen while the washer fills.

  2. Door seal (front-loaders)

    A torn seal, or one with a sock or hair trapped in the fold, leaks at the front, usually during the wash.

  3. Too much detergent

    Excess suds can push out through the door or the detergent drawer. High-efficiency washers need HE detergent and less of it than the bottle often suggests.

  4. Drain hose

    A loose clamp, a split hose or a hose that has slipped out of the standpipe leaks during the drain.

  5. Drain pump or pump filter

    A pump filter not screwed in fully, or a cracked pump, leaks at the bottom front.

  6. Tub seal or bearings

    Less common. Water from the center underneath, often with noisy spinning, can mean the tub seal has failed.

Checks you can do

Safe checks before you call anyone.

  • Watch when it leaks

    During fill points at the hoses and inlet valve, during the wash at the door seal, during the drain at the hose or pump.

  • Tighten the fill hoses

    With the valves off, check both hose connections at the valve and the washer. Replace hoses that are cracked or bulging.

  • Inspect the door seal

    Pull back the fold of the seal, clear anything trapped and look for tears.

  • Check the pump filter cap

    Make sure it’s screwed in fully and the gasket is in place.

  • Cut back on detergent

    Use HE detergent and run a load with less to see if the leak stops.

When it’s a technician job

Call a technician if:

  • Water from underneath the middle

    Tub seals, internal hoses and pumps need the cabinet opened.

  • The seal is torn

    Door seals are replaceable but fiddly to fit properly.

  • It keeps leaking after you tighten the hoses

    The inlet valve may be cracked.

  • There’s grinding or banging as well

    Bearings and tub seals often fail together.

(833) 586-3850

What affects the cost

What moves the price.

We don’t quote prices here because they depend on the fault, the model and where you live. These are the things that make the difference. Ask for the estimate before any work starts.

  • Source of the leak

    New fill hoses are a small job. A door seal, pump or tub seal is more.

  • Washer type

    Front-loader door seals and stacked units take extra time.

  • Water damage

    Damage to the floor isn’t part of an appliance repair. If it has spread, you may need a restoration company as well.

Straight answers

Common questions.

Why is my front-load washer leaking from the door?

Usually something trapped in the door seal, a torn seal, or too many suds from too much detergent.

How often should washer fill hoses be replaced?

Many manufacturers suggest checking them regularly and replacing rubber hoses every few years. Braided stainless hoses last longer. Check your manual for your model.

How much will the repair cost?

Nobody can give you an honest number without seeing the machine. The technician diagnoses it, tells you the price, and only starts once you have agreed to it. If you would rather replace the appliance, you can stop there.

Who actually comes out?

An independent local technician who covers your zip code. We are a free service that connects you with them; they are not our employees and we do not guarantee their work. Ask for their license (where your state requires one) and proof of insurance before they start.

Still not working? One call.

A local technician, an arrival window and an estimate before any work starts.

(833) 586-3850
Tap to call

Call us

(833) 586-3850

Call from your phone. Thirty seconds is usually enough for us to know who to send.

Call from this computer