Troubleshooting · Washing machine repair
Why won’t my washer drain? What to check, and when to call.
A washer full of water at the end of a cycle usually has a blockage somewhere between the drum and the standpipe. The pump filter, the drain hose and the pump itself are where to look, in that order.
Before you start. Unplug the washer before you open the pump filter or move it. Expect water: put down towels and a shallow tray, because a front-loader’s filter can release a lot of it. If the water is hot, let it cool first.
Rather not do it yourself?
- One call, free to useTell us the make and what it’s doing.
- Matched on zip code and brandAn independent local technician who covers your area.
- Estimate before any workNothing gets opened up until you’ve agreed a price.
Why is my washer not draining?
Most of the time it’s a blockage: a clogged pump filter, a kinked or blocked drain hose, or a slow household drain. Clear the filter and check the hose first, because those are safe to do yourself.
If both are clear and it still won’t drain, the drain pump, the lid switch or door lock, or a control fault is next. Those need a technician to test.
Likely causes
What usually causes it, most likely first.
- Clogged pump filter
Front-loaders and many newer top-loaders have a filter behind a small panel at the bottom front. Coins, hair ties and lint collect there and stop the water.
- Kinked or blocked drain hose
Pushing the washer back can kink the hose. Lint and debris can also block it, especially where it enters the standpipe.
- Blocked household drain
If the standpipe or the laundry sink is slow, the washer isn’t the problem. Water backing up out of the standpipe is the giveaway.
- Failed drain pump
You hear a hum but no water moves, or you hear nothing at all during the drain step.
- Lid switch or door lock fault
Many washers won’t drain or spin if they don’t detect the lid or door as closed and locked.
- Control or sensor fault
Less common, but a board or pressure sensor problem can stop the drain step from starting.
Checks you can do
Safe checks before you call anyone.
- Clean the pump filter
Unplug the machine, put towels down, open the panel and unscrew the filter slowly to let the water out. Clear what you find.
- Straighten and check the drain hose
Pull the washer out and check the hose for kinks. Take the end out of the standpipe and look for a lint plug.
- Test the drain itself
Pour a bucket of water into the standpipe. If it backs up, call a plumber rather than an appliance technician.
- Run a drain and spin cycle on its own
Listen for the pump. A hum with no movement points at a jam or a failed pump.
- Note any error code
Write down the code and the make and model. It narrows down the fault before anyone arrives.
When it’s a technician job
Call a technician if:
- Filter and hose are clear and it still won’t drain
The pump, lid switch or control are next, and they need testing.
- The pump hums but nothing moves
Something may be jammed inside the pump housing, or the pump has failed.
- There’s no filter you can reach
Many older top-loaders need the cabinet opened to get at the pump.
- Water is leaking while it tries to drain
A cracked pump or hose under the machine needs replacing.
What affects the cost
What moves the price.
We don’t quote prices here because they depend on the fault, the model and where you live. These are the things that make the difference. Ask for the estimate before any work starts.
- Blockage or failed part
Clearing a jam is a shorter job than replacing a pump or a door lock.
- Front-load or top-load
Getting at the pump takes different amounts of work on different designs.
- Stacked or tight installs
A stacked unit or a washer in a closet takes longer to pull out.
Straight answers
Common questions.
Can I run the washer if it won’t drain?
Not until the cause is fixed. Running it again just adds water, and a struggling pump can burn out.
Why does my washer drain but leave clothes soaking?
It’s draining slowly or not spinning fast enough. A partly blocked filter or hose is the usual cause, and an unbalanced load is the next. See our guide to a washer not spinning.
How much will the repair cost?
Nobody can give you an honest number without seeing the machine. The technician diagnoses it, tells you the price, and only starts once you have agreed to it. If you would rather replace the appliance, you can stop there.
Who actually comes out?
An independent local technician who covers your zip code. We are a free service that connects you with them; they are not our employees and we do not guarantee their work. Ask for their license (where your state requires one) and proof of insurance before they start.
Keep going
Washing machine repair: more help.
Washing machine repair by city
- San Diego, CA
- Chicago, IL
- Boston, MA
- San Antonio, TX
- Charlotte, NC
- Sacramento, CA
- San Francisco, CA
- New York, NY
- Los Angeles, CA
- Seattle, WA
- Dallas-Fort Worth, TX
- Houston, TX
- Washington, DC
- West Palm Beach, FL
- Austin, TX
- Phoenix, AZ
- Las Vegas, NV
- Denver, CO
- Atlanta, GA
- San Jose, CA
- Miami, FL
- Fort Myers, FL
- Portland, OR
- Philadelphia, PA
Still not working? One call.
A local technician, an arrival window and an estimate before any work starts.
(833) 586-3850