Troubleshooting guideRefrigerator repair · Free to use
Appliance Repair HubLocal technicians, one callAreas
(833) 586-3850Free for homeowners
Call now

Troubleshooting · Refrigerator repair

Ice maker not working? What to check, and when to call.

When the ice stops, the problem is usually water not reaching the ice maker, a freezer that isn’t cold enough, or the ice maker itself. Most of the early checks take a few minutes and need no tools.

Before you start. Turn the ice maker off before you put your hands in the ice bin or near the ejector arm. Unplug the fridge before you pull it out to look at the water line, and shut the supply valve first if you are touching the line.

Rather not do it yourself?

  • One call, free to useTell us the make and what it’s doing.
  • Matched on zip code and brandAn independent local technician who covers your area.
  • Estimate before any workNothing gets opened up until you’ve agreed a price.
Start with a call

Likely causes

What usually causes it, most likely first.

  1. The ice maker is switched off

    The shut-off arm (the wire bail) is raised, or the switch or setting is off. It happens more than you would think.

  2. Freezer not cold enough

    Most ice makers won’t cycle until the freezer is well below freezing. If the freezer is warm, fix that first.

  3. Frozen or kinked water line

    The fill tube into the ice maker can freeze solid, and the line behind the fridge can kink when it’s pushed back.

  4. Clogged water filter

    An old filter slows the water to a trickle, which gives you small cubes or none at all.

  5. Failed water inlet valve

    The valve at the back of the fridge opens to let water in. When it fails, nothing fills. Low household water pressure can stop it opening too.

  6. Failed ice maker module

    The motor, sensor or control in the ice maker itself has stopped. It’s usually replaced as one unit.

Checks you can do

Safe checks before you call anyone.

  • Check the switch and the arm

    Make sure the ice maker is on and the shut-off arm is down. Look for ice jammed in the ejector.

  • Check the freezer temperature

    Put a thermometer in the freezer. The FDA recommends keeping the fridge at 40°F or below and the freezer at 0°F.

  • Change the water filter

    If it’s past its replacement date, swap it and run a few glasses through the dispenser.

  • Check the line behind the fridge

    With the fridge unplugged, ease it out and look for a kinked line and a fully open supply valve.

  • Thaw a frozen fill tube

    If you can see ice in the tube where water enters the ice maker, a hair dryer on low for a few minutes will clear it. Keep it away from plastic parts and water.

When it’s a technician job

Call a technician if:

  • Water reaches the fridge but not the ice maker

    Filter changed, line straight, still nothing. That points at the inlet valve or the ice maker.

  • The fill tube keeps freezing

    Repeated freezing usually means a valve that drips or a problem with the freezer’s airflow.

  • Water leaking from the ice maker

    Leaks inside the freezer turn into ice buildup and damage.

  • The freezer itself is warm

    Then it’s a cooling problem, not an ice maker problem.

(833) 586-3850

What affects the cost

What moves the price.

We don’t quote prices here because they depend on the fault, the model and where you live. These are the things that make the difference. Ask for the estimate before any work starts.

  • Valve or module

    An inlet valve and a full ice maker assembly are different parts at different prices.

  • In-door ice makers

    Ice makers built into the fridge door on many French-door models take more time to get at.

  • Brand and model

    Some brands’ ice maker assemblies are much harder to source than others.

Straight answers

Common questions.

Why is my ice maker making small or hollow cubes?

Too little water is getting in. A clogged filter is the most common reason, followed by low water pressure or a valve that is starting to fail.

How long does a new ice maker take to make ice?

Expect most of a day before the first batch, and longer to fill the bin. Throw the first few batches away, since they can carry debris from a new line or filter.

How much will the repair cost?

Nobody can give you an honest number without seeing the machine. The technician diagnoses it, tells you the price, and only starts once you have agreed to it. If you would rather replace the appliance, you can stop there.

Who actually comes out?

An independent local technician who covers your zip code. We are a free service that connects you with them; they are not our employees and we do not guarantee their work. Ask for their license (where your state requires one) and proof of insurance before they start.

Still not working? One call.

A local technician, an arrival window and an estimate before any work starts.

(833) 586-3850
Tap to call

Call us

(833) 586-3850

Call from your phone. Thirty seconds is usually enough for us to know who to send.

Call from this computer