Troubleshooting guideDryer repair · Free to use
Appliance Repair HubLocal technicians, one callAreas
(833) 586-3850Free for homeowners
Call now

Troubleshooting · Dryer repair

Dryer not heating? What to check, and when to call.

If the drum turns but there’s no heat, the dryer has power to the motor but not to the heat source. On electric dryers that is often a tripped breaker leg or a failed element. On gas dryers it’s often the igniter or the gas valve coils. A blocked vent is behind a lot of both.

Before you start. Unplug the dryer before you move it or open any panel. On a gas dryer, if you smell gas, don’t touch any switches: leave the house and call your gas utility from outside. The US Fire Administration lists failure to clean as the leading factor in home clothes dryer fires, so a clogged vent is worth taking seriously.

Rather not do it yourself?

  • One call, free to useTell us the make and what it’s doing.
  • Matched on zip code and brandAn independent local technician who covers your area.
  • Estimate before any workNothing gets opened up until you’ve agreed a price.
Start with a call

Likely causes

What usually causes it, most likely first.

  1. Blocked lint filter or vent

    A clogged vent makes the dryer overheat, which trips a safety thermostat or blows a thermal fuse. After that, there’s no heat at all.

  2. Tripped breaker (electric dryers)

    Electric dryers run on a double breaker. If one half trips, the drum can still turn but the element gets no power.

  3. Blown thermal fuse

    A one-time safety device that cuts heat when the dryer gets too hot. It usually blows because of a vent problem, so it’s worth fixing both.

  4. Failed heating element (electric)

    Elements burn out over time. A broken coil means no heat.

  5. Igniter or gas valve coils (gas)

    If you can’t see a glow or hear the burner light, the igniter or the valve coils are the usual suspects.

  6. Thermostat or control fault

    A cycling thermostat or the control board can stop heat even when the parts that make it are fine.

Checks you can do

Safe checks before you call anyone.

  • Clean the lint filter

    Every load. Wash it if dryer sheets have left a film on it.

  • Check the vent outside

    Run the dryer and feel the vent hood outside. Weak airflow means a blocked or crushed vent.

  • Check the breaker

    For an electric dryer, switch the double breaker fully off and back on.

  • Try a different setting

    If it heats on one setting and not another, that points at a control or thermostat rather than the heat source.

  • Check the gas supply (gas dryers)

    Make sure the gas valve to the dryer is open. Don’t do anything beyond that.

When it’s a technician job

Call a technician if:

  • Breaker and vent are fine and there’s still no heat

    Fuses, elements, igniters and thermostats need a meter to test.

  • Any gas dryer problem past the valve

    Leave gas components to a technician.

  • It keeps blowing fuses

    Something is making it overheat, and that needs finding.

  • Burning smell

    Stop using it until it’s been looked at.

(833) 586-3850

What affects the cost

What moves the price.

We don’t quote prices here because they depend on the fault, the model and where you live. These are the things that make the difference. Ask for the estimate before any work starts.

  • Electric or gas

    Elements, igniters and gas valve coils are different parts with different labor.

  • Vent cleaning

    If the vent run is long or goes through the roof, cleaning it can be a job of its own.

  • Stacked units

    A stacked washer-dryer in a closet takes longer to get into.

Straight answers

Common questions.

Why does my dryer spin but not heat?

The motor has power but the heat source doesn’t. On electric dryers, check the breaker first. On both types, a blocked vent that blew a thermal fuse is a common cause.

Can a clogged dryer vent cause a fire?

Yes. The US Fire Administration lists failure to clean as the leading factor contributing to home clothes dryer fires. Clean the lint filter every load and have the vent checked if drying times creep up.

How much will the repair cost?

Nobody can give you an honest number without seeing the machine. The technician diagnoses it, tells you the price, and only starts once you have agreed to it. If you would rather replace the appliance, you can stop there.

Who actually comes out?

An independent local technician who covers your zip code. We are a free service that connects you with them; they are not our employees and we do not guarantee their work. Ask for their license (where your state requires one) and proof of insurance before they start.

Still not working? One call.

A local technician, an arrival window and an estimate before any work starts.

(833) 586-3850
Tap to call

Call us

(833) 586-3850

Call from your phone. Thirty seconds is usually enough for us to know who to send.

Call from this computer