Troubleshooting guideDishwasher repair · Free to use
Appliance Repair HubLocal technicians, one callAreas
(833) 586-3850Free for homeowners
Call now

Troubleshooting · Dishwasher repair

Dishwasher not cleaning? What to check, and when to call.

When dishes come out dirty, the usual culprits are a clogged filter, blocked spray arms or water that isn’t hot enough. Hard water adds a white film. Parts failures, like a weak wash pump or a bad fill valve, come after the simple things.

Before you start. Turn the dishwasher off before you take out the spray arms or filter. Spray arm holes and filters can hold broken glass.

Rather not do it yourself?

  • One call, free to useTell us the make and what it’s doing.
  • Matched on zip code and brandAn independent local technician who covers your area.
  • Estimate before any workNothing gets opened up until you’ve agreed a price.
Start with a call

Likely causes

What usually causes it, most likely first.

  1. Clogged filter

    A dirty filter recirculates food back onto the dishes.

  2. Blocked spray arm holes

    Food, seeds and hard water scale block the small holes, so parts of the racks never get sprayed.

  3. Water not hot enough

    Dishwashers clean best with hot water. If the kitchen tap takes a long time to run hot, the first fill can be cool.

  4. Loading

    Tall items blocking the spray arms or the detergent door stop water reaching everything.

  5. Hard water and detergent

    Hard water leaves a white film. Old or clumped detergent doesn’t dissolve well. Rinse aid helps with both.

  6. Wash pump, fill valve or heater

    If the dishwasher isn’t filling properly, isn’t spraying hard, or isn’t heating, a part may have failed.

Checks you can do

Safe checks before you call anyone.

  • Clean the filter

    Rinse and scrub it, and clear the sump underneath.

  • Clear the spray arms

    Pop them off, rinse them and use a toothpick to clear the holes. Spin them by hand to make sure they turn freely.

  • Run the kitchen tap hot first

    Before you start a cycle, run the hot tap until it’s hot.

  • Check the loading

    Make sure nothing stops the spray arms turning or the detergent door opening.

  • Try fresh detergent and rinse aid

    Keep detergent dry and fill the rinse aid dispenser.

When it’s a technician job

Call a technician if:

  • Filter and arms are clean and it still isn’t cleaning

    The wash pump, fill valve or heating element may need testing.

  • It isn’t filling with enough water

    That points at the inlet valve or a float switch.

  • Dishes come out cold at the end

    The heater or its control may have failed.

  • Grinding or humming noises

    Something may be caught in the pump.

(833) 586-3850

What affects the cost

What moves the price.

We don’t quote prices here because they depend on the fault, the model and where you live. These are the things that make the difference. Ask for the estimate before any work starts.

  • Which part

    A spray arm or float switch is a smaller job than a wash pump or a heater.

  • Brand and model

    Parts availability varies a lot by brand.

  • Install

    Getting the dishwasher out from under the counter adds time on some installs.

Straight answers

Common questions.

Why are my dishes coming out with a white film?

Usually hard water minerals, sometimes too much detergent. Rinse aid and the right amount of detergent help. A dishwasher cleaner can remove buildup inside the machine.

How often should I clean the dishwasher filter?

Check your manual. For many households, once a month is a good starting point, and more often if you don’t scrape plates.

How much will the repair cost?

Nobody can give you an honest number without seeing the machine. The technician diagnoses it, tells you the price, and only starts once you have agreed to it. If you would rather replace the appliance, you can stop there.

Who actually comes out?

An independent local technician who covers your zip code. We are a free service that connects you with them; they are not our employees and we do not guarantee their work. Ask for their license (where your state requires one) and proof of insurance before they start.

Still not working? One call.

A local technician, an arrival window and an estimate before any work starts.

(833) 586-3850
Tap to call

Call us

(833) 586-3850

Call from your phone. Thirty seconds is usually enough for us to know who to send.

Call from this computer